What it welds
The Taskzoom TZ005-MIG165-1P-U1 MIG Welder is a MIG / gas with a maker-stated output of up to 165 amps on 110 or 220-volt input.
Miller's starting rule, 1 amp for each 0.001 inch of steel, puts 165 amps at roughly 0.165 in of steel in one pass; thicker work means bevels and more passes. Run the amperage selector.
The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.
Processes, per the maker: Gas MIG,Flux Core. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.
It runs solid wire under shielding gas for the cleanest wire-feed welds; most machines like it also run flux-core wire outdoors.
Running on 120 or 240 volts, it trades output for convenience on the lower input. What input voltage changes.
Use a lens of at least OSHA's minimum shade for the current: shade 10 or darker for typical MIG work here. Shade chart.
Also on the listing: dimensions of 14.6 x 6.1 x 10.6 inches and a weight of 15 lb.
Is it the right machine for the job?
Buy it for
- Clean steel welds indoors
- Steel to about 0.165 in per pass
Skip it for
- Steel much past 0.165 in in one pass
What it does well, where it falls short
Does well
- Up to 165 A output
- Dual-voltage input
Falls short
- Duty cycle not stated with amps
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | TZ005-MIG165-1P-U1 | Retailer |
|---|---|---|
| Product weight | 15 lb | Retailer |
| Dimensions (seller) | 14.6 x 6.1 x 10.6 inches | Retailer |
| Size | MIG Welder 165A | Retailer |
| Material | Metal, Plastic | Retailer |
| Power | ac | Retailer |
| Input power | 110 volts, 220 volts | Retailer |
| Output range | 165a | Retailer |
| Processes | Gas MIG,Flux Core | Retailer |
Machines to put next to it
Other mig and flux-core welders in the same amp range
Final verdict
A match for clean steel welds indoors.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure