TOOLIOM MIG-200 PRO Multi-Process Welder

What it welds

The TOOLIOM MIG-200 PRO Multi-Process Welder is a multi-process; its listing doesn't state an output range, so check the rating plate.

The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.

Processes, per the maker: Gas MIG, Flux Core, Spool Gun. Check which torches and guns come in the box; a TIG torch or spool gun is often extra. Process guide.

Eye protection: OSHA's minimum is shade 10 for most of this machine's range (shade 10 for stick above 160 A). Full table.

Also on the listing: a weight of 35.5 lb.

Is it the right machine for the job?

Buy it for

A shop that does a bit of everything

Skip it for

What it does well, where it falls short

Does well

Multi-process

Falls short

Duty cycle not stated with amps
Torches may be extra
Output range not stated

Power and setup notes

Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.

Rated output and specs

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model number	MIG-200 PRO	Retailer
Product weight	35.5 lb	Retailer
Size	200A MIG Welder	Retailer
Material	Metal	Retailer
Power	ac	Retailer
Input power	110220 V	Retailer
Wattage	5600 W	Retailer
Output range	200-Amp	Retailer
Wire sizes	030", .035"	Retailer
Processes	Gas MIG, Flux Core, Spool Gun	Retailer
Spool gun	Spool Gun	Retailer