What it welds
The ARCCAPTAIN FD008-2KG E71T-GS.030 in Welding Wire is a wire.
Match wire diameter to the current: Miller's table puts.023 inch at 30 to 130 A,.030 at 40 to 145 A,.035 at 50 to 180 A and.045 at 75 to 250 A. Solid wire needs shielding gas; flux-cored wire shields itself. Amps and wire size.
From the listing: size: 2LB; material: 2lb.
Also on the listing: a weight of 4.31 lb.
Is it the right machine for the job?
Buy it for
- Feeding a MIG machine
Skip it for
- Machines or torches it doesn't name
What it does well, where it falls short
Does well
- 2LB
- 2LB
Falls short
- Check fit before ordering
Power and setup notes
- Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.
Rated output and specs
Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.
| Model number | FD008-2KG | Retailer |
|---|---|---|
| Product weight | 4.31 lb | Retailer |
| Size | 2LB | Retailer |
| Material | 2LB | Retailer |
Machines to put next to it
Other welding gear and consumables in the same amp range
- SONNLER ww03 E71T-GS Welding Wire
- SONNLER ww01 E71T-GS Welding Wire
- PGN BEARINGS ZY-GHM-0902-06 ER70S-6.035 in Welding Wire
- ARCCAPTAIN E71T-GS.030 in Welding Wire
Every welding gear and consumables on one spec sheet · All ARCCAPTAIN machines listed
Final verdict
A match for feeding a MIG machine.
Where to buy
Our links open this exact model's product page. Prices and stock change; check what's included before you order.
Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure