TOOLIOM TL-M800D Auto-Darkening Welding Helmet: optical class 1/1/1/1

What it welds

The TOOLIOM TL-M800D Auto-Darkening Welding Helmet is an auto-darkening.

Check that range against OSHA's minimums for your work: shade 10 for MIG from 60 to 500 amps, shade 8 for stick from 60 to 160 amps, shade 8 for TIG up to 150 amps. Shade chart.

Per the maker: viewing area 3.94 x 3.27 inch; optical class 1/1/1/1; power: solar. What each spec means.

Test the lens before every use; a lens that fails to darken exposes your eyes to the arc. Wear safety glasses with side shields under the helmet where chips can fly, as OSHA's fact sheet advises.

Also on the listing: a weight of 0.58 kg.

Is it the right machine for the job?

Buy it for

Everyday MIG and stick
Bench work

Skip it for

Work needing a shade outside its range
Grinding without a grind mode

What it does well, where it falls short

Does well

View 3.94 x 3.27 inch
Optical class 1/1/1/1

Falls short

Shade range not stated

Power and setup notes

Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.

Rated output and specs

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model number	TL-M800D	Retailer
Size	3.94" x 3.27"	Retailer
Product weight	0.58 kg	Retailer
Model name	TL-M800D	Retailer
Material	Plastic	Retailer
Closure	Strap	Retailer
Viewing area	3.94 x 3.27 inch	Retailer
Optical class	1/1/1/1	Retailer
Power	solar	Retailer