AC/DC TIG ยท AHP

AHP Alpha-TIG225Xi AC/DC TIG Welder

AC/DC TIG, up to 225 A, 120 V

Updated October 2026

Quick verdict

Made for aluminium and thin metal.

Strength
Up to 225 A output.
Trade-off
Duty cycle not stated with amps.
Right buyer
Aluminium and thin metal.
Processes
TIG/Stick
Output range
225 amp
Input power
120v
AC / DC
ac/dc
Pulse
Pulse
Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

What it welds

The AHP Alpha-TIG225Xi AC/DC TIG Welder is an AC/DC TIG with a maker-stated output of up to 225 amps on 120-volt input.

At its top output of 225 amps, Miller's 1-amp-per-thousandth rule points to about 0.225 in of steel per pass. Where the rule comes from.

The listing doesn't give a duty cycle with its amperage, which makes long beads hard to plan; the rating plate or manual should state it. Why it matters.

Processes, per the maker: TIG/Stick. Most multi-process machines' TIG is DC lift-arc, so no aluminium unless AC is stated. Choosing a process.

It's AC/DC, so it can weld aluminium as well as steel and stainless. Pulse: Pulse.

Household 120-volt power caps its output; check the circuit size the manual asks for. What input voltage changes.

Use a lens of at least OSHA's minimum shade for the current: shade 8 or darker for typical TIG or stick work here. Shade chart.

Is it the right machine for the job?

Buy it for

  • Aluminium and thin metal
  • Steel to about 0.225 in per pass

Skip it for

  • Steel much past 0.225 in in one pass

What it does well, where it falls short

Does well

  • Up to 225 A output
  • Runs on household 120 V
  • AC/DC for aluminium
  • Pulse: Pulse

Falls short

  • Duty cycle not stated with amps
  • 120 V caps output

Power and setup notes

  • Ratings are the maker's own, stated under the maker's conditions. Follow the manual, wear eye protection of at least OSHA's minimum shade, keep combustibles away, ventilate, and have a licensed electrician install new circuits.

Rated output and specs

Every figure below comes from the source shown in brackets. Where the maker doesn't state something, we say so instead of estimating.

Model numberAlpha-TIG225XiRetailer
Output range225 ampRetailer
Input power120vRetailer
ProcessesTIG/StickRetailer
AC / DCac/dcRetailer
PulsePulseRetailer

Machines to put next to it

Other tig welders in the same amp range

Every tig welders on one spec sheet

Final verdict

Made for aluminium and thin metal.

Where to buy

Our links open this exact model's product page. Prices and stock change; check what's included before you order.

Prices change often; the button shows today's price.

Each button opens this exact model. We may earn a commission on tracked links; it never changes what we publish. Disclosure

Questions buyers ask

How thick can the AHP Alpha-TIG225Xi AC/DC TIG Welder weld?
By Miller's 1 A per 0.001 in rule its 225 A top output reaches about 0.225 in in one pass.
What is the AHP Alpha-TIG225Xi AC/DC TIG Welder's duty cycle?
The listing doesn't state it with an amperage; check the rating plate or manual.
What power does the AHP Alpha-TIG225Xi AC/DC TIG Welder need?
120 volts per the maker; the manual states the circuit and plug.